Loading... Please wait...
Shop By Categories
- Home
- Pumps
- Booster and Delivery Pumps
- Booster Pump Kits
Booster Pump Kits
Product Description
Both kits includes an Aquatec 8800 booster pump, high pressure switch, strainer, and a transformer. The ESO kit also includes a electronic shut off valve to stop the flow of water to the water treatment system when the pump is turned off.
The cleanable strainer protects the pump from fines released by the carbon filter. Best used with a liquid-filled pressure gauge. Please download your detailed installation instructions.
Product Reviews
-
made my system work very well
Posted by Andrew on 13th Sep 2016
Took my 150GPD premium system from barely working at all on poor city water pressure, to producing 130 gpd at 6 ppm tds (down from input of 325 ppm tds), with pressure set to 80 psi, and at a 1 to 2.5 RO to waste ratio. Exactly what I was hoping for!
-
COMPLETE RO/DI and BOOSTER PUMP UNITS
Posted by Scott on 21st Sep 2015
The units from Buckeye Hydro are by far the best for the price. Why would you want to order any where else when you have Buckeye that almost seems available 24/7 to answer any of your questions and walk you through anything you need to know when setting up these units?
-
Works well and consistently!
Posted by Russel Kubes on 31st Jan 2015
I ordered and installed my booster pump at least 6 months ago. It has been working strong since.
I installed mine after the pre-filters, so only the RO Membrane is exposed to the high pressure.
I've had it run up to 5 hours at a time with no issue. It makes a noticeable difference in the flow.
It will vibrate when operating, but it comes with rubber isolaters on the mount to minimize the noise.
It also allows water to pass through it when it is off. So you can easily run the system without using the pump if you ever need/want to.
-
easy install
Posted by Daniel Vance on 30th Dec 2013
Nice quiet unit very easy to install although I had some doubts about the wiring so I called Buckeye Hydro and they immediately answered and talked me through it. Turns out I had it right just didn't allow the system to build up pressure after turning off product water to allow the pressure switch to shut off the pump. You will need the liquid filled pressure gauge. Dry gauges DO NOT work.
YOU MAY ALSO LIKE
Our Newsletter
Sign up for exclusive updates and special offers!
Shipping
Buckeye typcially ships the same day, or less commonly, the day after an order is placed. The majority of our shipments are sent UPS Ground or FedEx Ground. Estimated delivery times for these services are similar, and are shown below. See our policies page for additional shipping information.
Read More About ShippingFAQ
When should I replace my filters?
Will Buckeye filters fit properly in my water filtration system?
Do I need to do anything special when I install new cartridges in my RO or RO/DI system?
